Body and Accessories

Airbag

AAASTAND® airbags are engineered with high-strength woven nylon or polyester airbag fabrics, precision-folding modules, and pyrotechnic inflators designed for stable deployment across temperature ranges, low-weight construction, and long-term storage integrity. AAASTAND® airbag modules are designed to rapidly deploy upon collision detection, providing critical cushioning to reduce occupant injury. Available in driver airbags, passenger airbags, side-impact airbags, curtain airbags, and knee protection airbags.

Antenna Mast

AAASTAND® antenna masts are manufactured using stainless steel, fiberglass-reinforced composites, or flexible rubberized materials engineered for optimal signal reception, weather resistance, and structural durability. AAASTAND® masts ensure consistent AM/FM, DAB, and GPS reception depending on design. Available in fixed, flexible rubber, collapsible, spiral-style, and low-profile sport mast configurations. OE-style thread bases (M5/M6/M7), mounting angles, and connector interfaces allow direct-fit compatibility with Ford® global vehicle platforms.

Automobile Auxiliary Power Outlet

AAASTAND® cigarette lighters are built with heat-resistant ceramic insulators, copper-alloy conductors, and high-temperature stainless steel heating coils designed for electrical safety, thermal stability, and durability. The 12V sockets feature reinforced brass contacts, overheat protection, and corrosion-resistant housings suitable for continuous accessory power use. AAASTAND® 12V lighter assemblies function as both cigarette igniters and universal power outlets for chargers, inverters, and onboard accessories. Available in heating-coil type lighter plugs, 12V/24V power sockets, and full assemblies with illumination rings and dust caps.

Automotive Glass

AAASTAND® automotive glass is manufactured using laminated or tempered safety glass with high-clarity optical substrates, UV-absorbing interlayers, and precision-molded edges. The glass undergoes optical distortion inspection, impact resistance testing, and thermal cycling validation. AAASTAND® glass provides driver visibility, cabin protection, and structural reinforcement for modern vehicle bodies. Available for front windshields, rear windows, fixed and movable side windows, quarter glass, and panoramic roof panels. Optional features include acoustic insulation layers, solar-control coatings, heating grids, rain sensor mounts, ADAS camera brackets, and antenna integration.

Automotive Heat Insulation

AAASTAND® heat insulation pads are manufactured from multilayer aluminum-foil composites, fiberglass mats, polyurethane foam, or high-density felt materials engineered for superior thermal resistance, acoustic damping, and vibration control. AAASTAND® insulation pads provide effective thermal shielding for engine compartments, firewalls, cabins, exhaust tunnels, and underbody structures. Available with pressure-sensitive adhesives, molded contours, and reinforced aluminum layers for high-heat zones up to 500°C, depending on material grade.

Automotive Window Seal Strip

AAASTAND® window seal strips are manufactured from high-elasticity EPDM, TPE, or PVC composite rubber with UV-resistant and ozone-resistant formulations. Each seal undergoes aging simulation, water-leak testing, and high/low-temperature cycle validation. Compatible with passenger cars, SUVs, and light commercial vehicles from Ford®. AAASTAND® seals minimize wind noise, prevent water ingress, reduce vibration, and stabilize window movement. Available in inner belt weatherstrips, outer belt weatherstrips, glass run channels, door frame seals, and trunk sealing profiles.

Bearing

AAASTAND® bearings are manufactured using high-carbon chromium steel (GCr15/SAE 52100), stainless steel, or hybrid ceramic materials engineered for superior load capacity, rotational precision, and wear resistance. Precision-ground raceways, hardened rolling elements, and low-friction cages ensure smooth operation under high-speed and heavy-load conditions. AAASTAND® bearings deliver reliable performance across engine systems, transmissions, wheel hubs, driveline assemblies, alternators, tensioners, HVAC motors, steering mechanisms, and suspension components.

Bracket

AAASTAND® brackets are manufactured using high-strength steel, aluminum alloy, or reinforced composite materials engineered for optimal rigidity, corrosion resistance, and dimensional stability. AAASTAND® brackets provide secure structural support for powertrain components, suspension systems, cooling assemblies, interior modules, exterior trim, and various attachment points. Available in engine brackets, transmission brackets, sensor brackets, light brackets, hose brackets, and multifunction mounting supports.

Bumper

AAASTAND® bumpers are manufactured from high-impact PP/PP+EPDM polymer, ABS, or reinforced composite materials, combined with steel or aluminum energy-absorbing reinforcement bars, designed for impact resistance, deformation control, and long-term environmental performance. AAASTAND® bumpers provide exterior protection by absorbing and redirecting low-speed impact forces while integrating aerodynamic styling, mounting points, and sensor housings (PDC, radar, and camera). Available in front and rear configurations with optional reinforcement beams, foam absorbers, tow hook covers, and parking sensor brackets.

Bumper Light

AAASTAND® bumper lights are engineered with high-transparency polycarbonate lenses, UV-resistant coatings, and precision-molded housings. LED modules utilize high-efficiency chips, integrated thermal management, and EMI-shielded driver circuits for stable illumination and long operating life. AAASTAND® bumper lights enhance vehicle visibility by providing clear signaling and illumination at the front or rear bumper. Available in LED or halogen configurations, including fog lights, DRLs, cornering lamps, and rear reflectors with integrated LEDs.

Bushing

AAASTAND® bushings are manufactured from high-strength polyurethane, rubber, or composite materials with precision-molded inner sleeves and corrosion-resistant metal reinforcements. Engineered to meet OEM vibration-damping, wear-resistance, and dimensional tolerance standards. AAASTAND® bushings provide reliable noise, vibration, and harshness (NVH) control, smooth articulation, and long service life in suspension, steering, and chassis applications. Available in a wide range of diameters, shapes, and durometers, they are compatible with front, rear, and subframe mounting configurations.

Cabin Air Filter

AAASTAND® cabin air filters are manufactured using high-efficiency electrostatic melt-blown media, multi-layer particulate filtration structures, and optional activated carbon layers. Filters undergo tests for filtration efficiency (PM10/PM2.5), airflow resistance, dust-holding capacity, and structural integrity, and meet ISO 11155-1/2 standards. AAASTAND® filters block pollen, dust, soot, allergens, and harmful gases to maintain clean cabin air and protect HVAC evaporator components. Available in particulate-type, activated carbon-type, and HEPA-grade versions with OE-style fitment.

Car Ashtray

AAASTAND® ashtrays are manufactured using flame-retardant ABS/PC materials, high-temperature-resistant liners, and precision-fitted lids. Each unit undergoes thermal resistance testing, odor-retention evaluation, and repeated open-close cycle validation to ensure safe and reliable use. AAASTAND® ashtrays provide a clean, sealed container for ash and small waste, preventing odor leakage inside the cabin. Available in removable portable designs, built-in console ashtrays, illuminated variants, and soft-close lid mechanisms.

Car Door Hinge

AAASTAND® door hinges are manufactured from high-strength steel or forged aluminium with corrosion-resistant coatings, precision-machined pivot pins, and long-life bushings. Each hinge undergoes opening-cycle endurance tests, torque resistance verification and thermal cycling to ensure long-term structural stability and smooth operation. AAASTAND® hinges provide secure and stable door articulation while maintaining proper alignment under vibration, body flex, and repeated use. Available in upper and lower hinge configurations with OE-style mounting points and reinforced knuckles.

Car Door Lock

AAASTAND® door locks are built with high-strength zinc alloy latches, hardened steel pawls, precision-molded housings, and low-friction mechanisms. Undergoes life-cycle endurance testing, latch strength verification, thermal cycling, and corrosion resistance assessments to meet FMVSS 206 in the US or ECE R11 in Europe. AAASTAND® locks ensure secure door engagement and smooth opening/closing operation across a range of body styles. Available in manual, key-operated, and power central locking configurations. Select models include integrated actuators, position sensors, child safety locks, and anti-theft detent structures.

Car Door Seal

AAASTAND® door seal strips are manufactured from high-elasticity EPDM, TPE, or PVC composite rubber engineered for long-term compression resistance, wind-noise reduction, and water sealing performance. Precision extruded profiles ensure consistent sealing along door frames while maintaining low closing effort and stable fitment. AAASTAND® seals effectively block wind, dust, rain, and vibration while improving NVH performance and cabin comfort. Available in primary door seals, secondary edge seals, double-lip sealing profiles, and pinch-weld designs.

Car Fender

AAASTAND® fenders are manufactured using high-strength steel, aluminum alloy, or composite materials engineered for superior impact resistance, corrosion protection, and long-term structural stability. Each panel is produced with precision stamping or injection molding techniques and finished with electrophoretic coating (E-coat), anti-corrosion primers, or UV-resistant top layers to meet OEM exterior body standards. AAASTAND® fenders provide reliable wheel-arch protection, aerodynamic contouring, and seamless alignment with bumpers, headlights, and side body panels.

Car Grille

AAASTAND® grilles are manufactured using high-strength ABS, polycarbonate, or aluminum alloys with UV-resistant coatings and impact-resistant finishes. Precision-molded slats and frames are engineered to meet OEM aerodynamic, safety, and dimensional standards. AAASTAND® grilles provide optimized airflow to the radiator and engine bay while enhancing vehicle aesthetic appeal. Available in front and bumper-integrated configurations with chrome, matte, or painted finishes. Designed for use under varying weather conditions and road debris exposure.

Door Handle

AAASTAND® door handles are injection-molded from impact-resistant ABS or die-cast zinc alloy, with surface finishes including textured black, body-color primer, chrome plating, or satin aluminum. Ensure reliable entry and exit under all environmental conditions. AAASTAND® door handles are designed for both exterior and interior applications. Each handle integrates precision return springs, reinforced pull levers, and anti-corrosion hardware for long-term structural integrity. Available with keyhole, keyless, or smart-entry sensor configurations.

Engine Oil

AAASTAND® engine oils are formulated with high-purity base oils and advanced additive packages, engineered to meet API, ACEA, and OEM viscosity and performance standards. Each formulation provides superior lubrication, thermal stability, and oxidation resistance to protect engine components under diverse operating conditions. AAASTAND® engine oils deliver optimal wear protection, reduced friction, and improved fuel efficiency for gasoline, diesel, and hybrid engines. Available in multiple viscosity grades and synthetic, semi-synthetic, or mineral variants, they ensure consistent performance in extreme temperatures, heavy load conditions, and prolonged service intervals.

Fog Light

AAASTAND® fog lights are built with high-transparency polycarbonate lenses, UV-resistant coatings, and impact-resistant ABS/PC housings engineered to meet SAE J583, DOT, and ECE R19 lighting standards. LED variants utilize high-efficiency optical chips, precision reflectors or projector modules, and EMI-shielded constant-current drivers to deliver stable illumination in low-visibility environments. AAASTAND® fog lights provide a wide, low-beam light pattern optimized for rain, fog, snow, and dust conditions. Available in halogen, reflector-type LED, projector-type LED, and DRL-integrated designs.

Gas Spring

AAASTAND® gas springs are manufactured with high-strength steel cylinders, precision-honed inner walls, hardened chrome-plated rods, and oil-nitrogen dual-chamber damping systems. Anti-corrosion coatings, wear-resistant seals, and low-friction guides ensure smooth operation and extended service life. AAASTAND® gas springs provide controlled lifting, holding, and soft-closing functions for hoods, trunks, tailgates, liftgates, tonneau covers, and interior compartments. Available in fixed-force, variable-force, lockable, and damped (soft-open/soft-close) configurations with OE-style end fittings, ball studs, brackets, and mounting dimensions.

Headlight

AAASTAND® headlights are engineered with high-transparency polycarbonate lenses, UV-hardcoat surface treatments, and impact-resistant ABS/PP housings, designed to meet SAE, DOT, and ECE R149 lighting standards. Optical systems utilize precision reflectors or projector lenses, high-efficiency LED modules, and EMI-shielded driver circuits for stable illumination and long service life. AAASTAND® headlight units deliver optimized road illumination with sharp cutoff lines, consistent beam patterns, and enhanced nighttime visibility. Available in halogen, HID xenon, bi-LED, and full-LED configurations with optional DRL, turn signal modules, leveling motors, and adaptive lighting components.

Headlight Bracket

AAASTAND® headlight brackets are manufactured from high-strength nylon-reinforced PA66, ABS, or forged aluminum, depending on vehicle application, delivering excellent rigidity, impact resistance, and temperature stability. Precision mounting tabs ensure secure lamp positioning and eliminate beam misalignment. AAASTAND® brackets provide stable support for headlamp assemblies, maintaining optical alignment under road vibration, thermal expansion, and body flex. Available for left and right sides with OE-style mounting points, clips, and fastener locations for direct-fit installation.

Hood Handle

AAASTAND® hood handles are manufactured from high-strength ABS, reinforced nylon (PA66+GF), or zinc alloy hardware designed for structural reliability, ergonomic operation, and long-term durability. AAASTAND® hood handles provide secure and comfortable leverage for opening engine hoods and accessing front compartments. Available in interior release handles, exterior pull handles, and integrated cable-pull assemblies with OE-style mounting points and cable attachment structures. Compatible with Ford® passenger cars, SUVs, and light commercial vehicles.

Hood Lock

AAASTAND® hood locks are engineered with hardened steel latches, zinc-alloy housings, and corrosion-resistant surface treatments. Precision-machined pawls and spring-loaded mechanisms ensure secure engagement and consistent release force designed to meet SAE J362 standards. AAASTAND® hood locks provide reliable front-end retention for engine hoods under vibration, wind loads, and emergency conditions. Available in primary latch, secondary safety latch, and integrated release cable bracket configurations.

Hood Release Cable

AAASTAND® hood release cables are manufactured with multi-strand steel inner wires, corrosion-resistant zinc-coated surfaces, and high-strength PE/PA sheaths. Designed for control cable performance, tensile strength, and fatigue resistance. AAASTAND® cables ensure reliable hood release operation from the interior lever to the latch mechanism. Available in single-piece and dual-stage configurations with OE-style end fittings, grommets, and mounting clips for direct-fit installation.

License Plate Light

AAASTAND® license plate lights are engineered with high-transparency polycarbonate lenses, UV-resistant coatings, and impact-resistant ABS/PC housings. LED variants use high-efficiency chips with optimized thermal paths and EMI-shielded drivers for long service life and stable brightness. AAASTAND® license plate lights provide bright, uniform white illumination to ensure license plate visibility in low-light environments. Available in LED and halogen configurations with OE-style connectors, mounting tabs, and gasket seals for direct-fit installation.

Mud Flaps

AAASTAND® mudguards are manufactured from flexible TPO, HDPE, or rubber composite materials engineered for high impact resistance, weather durability, and deformation recovery. Precision molding ensures stable mounting and consistent coverage around wheel arches. AAASTAND® mudguards protect body panels and undercarriage components by reducing splash, debris impact, and road grime accumulation. Available in front and rear configurations with OE-style brackets, clips, and mounting holes for direct-fit installation.

Nut

AAASTAND® nuts are manufactured from high-strength steel, stainless steel, or aluminum alloys with precision threading, anti-corrosion coatings, and heat-treated surfaces to meet OEM torque, load, and durability standards. Ensure fastening and long-term reliability under dynamic mechanical and environmental conditions. AAASTAND® nuts provide consistent clamping force, vibration resistance, and corrosion protection for engine, chassis, suspension, and body applications. Available in a wide range of sizes, thread types, and finish options, they ensure optimal compatibility with bolts, studs, and threaded assemblies in automotive and industrial systems.

Oil Seal

AAASTAND® oil seals are manufactured from nitrile rubber compounds. They have precision-molded sealing lips and steel reinforcement cases designed to meet ISO 6194 fluid sealing standards. Spring-loaded lip construction maintains constant contact pressure against rotating shafts, while PTFE coatings reduce friction and heat generation. AAASTAND® oil seals prevent lubricant leakage in rotating shafts with dynamic lip contact, compensating for shaft runout and surface imperfections. Spring-energized lips ensure consistent sealing across temperature ranges, while integrated dust lips offer protection against contaminants.

Others

AAASTAND® body and exterior accessories utilize reinforced polymers, high-strength alloys, and corrosion- and UV-resistant coatings to meet OEM and international standards. AAASTAND® body and accessory products deliver consistent performance under everyday use and extreme weather conditions, ensuring long service life, reduced maintenance, and improved vehicle safety and appearance. Available across a wide range of configurations and finishes, they provide both functional reliability and a premium aesthetic upgrade for modern vehicles.

Rearview Mirror

AAASTAND® rearview mirrors are engineered with high-impact ABS/PP housings, breakaway hinge mechanisms, and distortion-free glass lenses with optional anti-glare coatings. Designed to meet or exceed FMVSS 111 and ECE R46 standards for reflective quality, vibration stability, and structural durability. AAASTAND® mirror assemblies ensure clear rear visibility and reliable structural performance. Available in manual-fold, power-fold, and heated configurations with integrated features including turn signal lamps, puddle lights, memory positioning, blind-spot detection (BSD) modules, and camera housings for ADAS systems.

Rearview Mirror

AAASTAND® rearview mirrors are engineered using high-impact ABS/PP housings, anti-distortion optical glass, and a reinforced breakaway hinge system. Motorized variants include high-efficiency DC motors, sealed gear assemblies, and corrosion-resistant terminals. AAASTAND® mirrors provide clear rear visibility and reliable structural integrity. Product options include manual or power folding, heated glass, integrated turn signal indicators, puddle lights, memory modules, blind-spot detection (BSD), and camera housings for ADAS.

Reverse Lights

AAASTAND® reversing lights are engineered with high-transparency polycarbonate lenses, UV-resistant coatings, and impact-resistant ABS/PP housings, designed to meet SAE, DOT, and ECE R23 standards. LED variants feature high-efficiency chips, optimized heat dissipation, and EMI-shielded drivers for consistent illumination and long service life. AAASTAND® reversing lights provide bright white illumination to enhance rear visibility and improve safety during reversing maneuvers. Available in LED and halogen configurations with OE-style connectors and mounting points for direct-fit replacement.

Sealing Ring

AAASTAND® sealing rings are manufactured using high-performance elastomers such as NBR, HNBR, FKM (Viton®), EPDM, or silicone, selected according to operating temperature, chemical exposure, and pressure requirements. Each ring is produced with precision molding or CNC-machined tooling to meet ISO 3601, DIN 3771, and OEM sealing-system standards. AAASTAND® sealing rings provide reliable static and dynamic sealing for engines, transmissions, fuel systems, cooling systems, and hydraulic assemblies. Available in O-rings, flat rings, gasket-type rings, bonded seals, and custom profiles.

Spring

AAASTAND® springs are precision-engineered from high-strength alloy steel or composite materials, heat-treated, and shot-peened for enhanced fatigue resistance and dimensional stability. Designed to meet OEM load, deflection, and durability standards, each spring ensures reliable performance under dynamic driving conditions. AAASTAND® springs provide consistent ride height, suspension compliance, and vehicle stability across front and rear suspension systems. Available in coil, leaf, and torsion configurations for optimal energy absorption and long-term fatigue life.

Sun Visor

AAASTAND® sun visors are constructed with high-strength polypropylene or ABS shells, impact-absorbing foam cores, and premium fabric or leather coverings. Hinges and pivot mechanisms are precision-engineered with corrosion-resistant metals or reinforced polymers, designed to meet OEM safety and durability standards. AAASTAND® sun visors provide reliable glare reduction and user-adjustable positioning for driver and passenger comfort. Available with integrated vanity mirrors, illumination, or ticket holders, supporting front and rear vehicle installations.

Tail Light

AAASTAND® tail lights are engineered with high-transparency polycarbonate lenses, UV-resistant surface coatings, and impact-resistant ABS/PMMA housings designed to meet or exceed SAE, DOT, and ECE R7/R38/R48 lighting standards. LED variants use high-efficiency chips, integrated thermal management structures, and EMI-shielded driver modules to ensure consistent brightness and long service life. AAASTAND® tail lights deliver bright, uniform illumination for braking, position, and turn signal functions, improving vehicle visibility and road safety. Available in halogen, partial LED, full LED, and light-guide (fiber optic) configurations.

Turn Signal Light

AAASTAND® turn signal lights are engineered with high-transparency polycarbonate or PMMA lenses, impact-resistant ABS housings, and UV-stable surface coatings. Designed to meet SAE, DOT, and ECE R6/R7 lighting standards. AAASTAND® turn signal lights deliver bright, uniform illumination for clear signaling and improved vehicle safety. Available in halogen, LED, or sequential LED configurations, with integrated thermal management and EMI-shielded driver modules. Suitable for front, rear, and side applications with direct-fit or modular mounting interfaces.

Window Regulator

AAASTAND® window regulators are engineered with high-strength steel guide rails, reinforced nylon pulleys, and wear-resistant cable systems or scissor mechanisms, designed for structural durability, smooth operation, and long-term reliability. Motorized versions utilize high-efficiency DC motors, copper-wound armatures, and sealed housings for superior torque output and moisture protection. AAASTAND® regulators ensure smooth, stable window movement for both manual and power window systems. Available in cable-type, scissor-type, and double-rail configurations with OE-style connectors and mounting points for direct-fit installation.

Windshield Wipers

AAASTAND® wiper blades are manufactured with high-quality natural or synthetic rubber compounds, reinforced with corrosion-resistant steel or polymer tension strips, and engineered with precision aerodynamic frames. Designed to meet SAE J903 and OEM wiping-system standards, they ensure uniform blade pressure and streak-free performance across the windshield. AAASTAND® wiper blades provide consistent, clear wiping in rain, snow, and high-speed conditions. Available in front and rear configurations with hook-type, pinch-tab, bayonet, or integrated connector interfaces.

Wiper Arm

AAASTAND® wiper arms are manufactured using high-strength steel or aluminum alloy with electrophoretic coating (E-coat) and UV-resistant surface treatments designed to meet SAE J903 and OEM wiping-system standards. Precision-machined splined bases ensure secure mounting to the wiper motor, while spring-tension–optimized linkages provide consistent blade pressure across the windshield. AAASTAND® wiper arms are engineered for stable, streak-free wiping performance in rain, snow, and high-speed driving. Available in front and rear configurations with hook-type, pinch-tab, bayonet, or integrated connector interfaces.

Wiper Linkage

AAASTAND® wiper linkages are precision-engineered with high-strength steel or aluminum alloy rods, corrosion-resistant joints, and sealed bushings designed to meet OEM movement accuracy and SAE J905 windshield-wiping standards. Each linkage assembly ensures minimal play, smooth articulation, and durable operation under repeated cycling. AAASTAND® wiper linkages deliver consistent blade motion and synchronized wiping across the windshield. Available in front and rear configurations with direct-fit, bolt-on, or modular mounting interfaces.

Wiper Motor

AAASTAND® wiper motors are engineered with precision-wound copper coils, high-torque brushed or brushless motors, and durable gear assemblies housed in corrosion-resistant aluminum or reinforced polymer casings. AAASTAND® wiper motors deliver smooth, consistent blade motion with optimized torque and speed control for front and rear windshield applications. Integrated thermal protection and sealed bearings enhance durability, while multiple mounting configurations support bolt-on and direct-fit OEM interfaces. Suitable for all weather conditions, including rain, snow, and high-speed driving.